
Ultraformer MPT — Skin Lifting with Ultrasound
Ultraformer MPT, or Ultraformer Micro Pulsed Technology, is an MMFU (Micro & Macro Focused Ultrasound) skin-lifting technology. It belongs to the same category as HIFU (High-Intensity Focused Ultrasound) and Ulthera, but differs slightly in its techniques, cartridges, or specific features depending on the model.
This article explains the concept behind Ultraformer MPT, how it works, how it differs from other skin-lifting devices, and summarizes the pros and cons to help you decide which option provides the best value.
Table of Content : Ultraformer MPT
What Is Ultraformer MPT?
Ultraformer MPT is a lifting device in the same group as HIFU treatments. It helps lift and firm the skin, reduce wrinkles, eliminate fat, and stimulate collagen production. It uses Focused Ultrasound with Hyperthermia Lifting Therapy to deliver energy into deep skin layers, in two modes: 1. Micro Focused Ultrasound and 2. Macro Focused Ultrasound.
| Micro Focused Ultrasound | Macro Focused Ultrasound |
|---|---|
| Penetration depth: 1.5 mm, 3 mm, 4.5 mm | Penetration depth: 6 mm, 9 mm, 13 mm |
| Heat temperature: approx. 65–75°C | Heat temperature: approx. 65–75°C |
| Energy focal spot diameter: 0.5 mm | Energy focal spot diameter: 1 mm |
Ultraformer MPT stands out for its advanced cartridges and energy delivery methods, covering skin lifting, fat reduction, and skin rejuvenation. It can operate in both NormalMode and Micro Pulse Mode.
There are four energy delivery patterns:
- MP (Micro Pulse) straight line
- Normal dot
- MP (Micro Circular) circle
- Circular dot

In Normal Mode, the energy is delivered as a sequence of small dots, while in MP Mode, it is delivered as continuous lines. This allows consistent heat accumulation and reduces discomfort during treatment.
How Many Models of Ultraformer Are There?
Ultraformer is commonly recognized as part of what people broadly refer to as HIFU machines. Devices in this group include:
- Ultraformer III, available in Light and Full Option models
- HIFU Power V Max Lift
- Ultraformer MPT

In addition, there are other skin-lifting devices with similar working principles, such as Smazlift, Sygmalift, Lifthera, and Contlex. Results and pricing vary depending on the technology used.
What Can Ultraformer MPT Do?
Ultraformer MPT has three primary treatment capabilities, designed to target specific concerns:
- Skin lifting
- Fat reduction
- Skin rejuvenation
More specifically, it can lift and tighten the skin on the face, neck, and body, contour the jawline, reduce double chin, minimize skin laxity, and soften fine lines across the face — including crow’s feet, under-eye wrinkles, frown lines, and lift the brows. It also improves nasolabial folds and marionette lines.
Thanks to its advanced cartridges, doctors can select different penetration depths to target fat reduction, stimulate collagen production, refine skin texture, and tighten pores. This ensures that each treatment delivers energy exactly to the intended skin layer for accurate, customized results.

Ultraformer MPT vs. Ultraformer III — Which One Is More Worthwhile?
If you usually receive Ultraformer III treatments, should you switch to Ultraformer MPT?
Ultraformer MPT provides benefits comparable to Ultraformer III and other skin-lifting devices such as Ulthera and Thermage.
Its main advantage is having a wider range of cartridges with more targeted options than Ultraformer III, making it ideal for patients who have specific concerns in certain areas and want shorter treatment times. However, it comes with a higher price point.

“If you’re balancing quality and price, Ultraformer III remains one of the most cost-effective and popular lifting devices available.”
Ultimately, the choice depends on your skin concerns, treatment goals, and budget. The core technology is not drastically different, and results are comparable. The distinctions are mainly in the available features — including shooting techniques, penetration depths, energy patterns, and cartridge designs.
Is Ultraformer MPT Safe?
Undergoing Ultraformer MPT, or any skin-lifting device in the same category, is safe when the treatment is performed using genuine equipment approved by the Thai FDA and legally imported.
Because many lifting devices look similar, choosing the wrong clinic or failing to verify the machine could result in being treated with counterfeit or imitation devices. These fake machines often lack proper safety systems and cannot maintain consistent energy output. They may operate at low power, producing no visible results, and in such cases the operator might increase the energy level, which can lead to skin burns.

Therefore, before having HIFU Ultraformer MPT, make sure the clinic uses authentic equipment with the same brand and model as advertised, and that the device can be verified. This ensures safe and effective results while avoiding the risks associated with substandard machines.
How Is Ultraformer MPT Different from Other Models?
The main feature that sets Ultraformer MPT apart from other Ultraformer models is its wider selection of cartridges, each designed to suit different skin types and concerns. Ultraformer MPT offers three cartridge types:
- Circular energy delivery (Circle): Emits energy in a circular pattern, helping rejuvenate and stimulate collagen production for brighter skin — for example, the ULTRABOOST cartridge.
- Linear energy delivery (Linear): Emits energy in straight lines, ideal for lifting while simultaneously reducing fat.
- Dot-line energy delivery (Dot Line): Emits energy in a sequence of precise, consistent dots, capable of reaching the SMAS layer.


Which Areas Can Ultraformer MPT Treat?
Ultraformer MPT can be used on the same areas as HIFU treatments, including the face, neck, upper arms, thighs, abdomen, waistline, back bulges, and excess skin under the armpits.
Advantages of Ultraformer MPT
- Equipped with up to 10 cartridges across 7 depth options (1.5 mm, 2 mm, 3 mm, 4.5 mm, 6 mm, 9 mm, 13 mm)
- Each line can deliver up to 417 energy dots
- 2.5 times faster than previous models, reducing treatment time (approximately 15–25 minutes, depending on the treatment area; larger areas require more time)
- Penetrates as deep as the SMAS layer
- Delivers 25 times more precise and concentrated heat energy than earlier models
- Less discomfort with Micro Pulse Mode
- Non-surgical, no incisions, no downtime
- Produces natural-looking results
Disadvantages of Ultraformer MPT
The main limitation of Ultraformer MPT, or other lifting devices in the same category, is that final results are not immediately visible. Only about 20% improvement can typically be seen right after treatment, with full results developing gradually over 2–3 months as the skin naturally regenerates.
It is also less suitable for patients with severe wrinkles, deep folds, or significant skin laxity, as the results will not be as dramatic. In such cases, complementary procedures such as dermal fillers, Botox, or thread lifts may be recommended.
Who Is Ultraformer MPT Suitable For?
- Individuals who want to reduce facial wrinkles, crow’s feet, and lift skin without surgery
- Those looking to contour the face and enhance jawline definition
- People seeking to improve skin laxity on the face and neck
- Patients who want to correct drooping mouth corners and marionette lines
- Individuals aiming to lift drooping brows
- Those looking to tighten sagging cheeks
- People who want to minimize pore size for smoother, more refined skin
- Individuals aiming to reduce excess fat
Getting Started with Ultraformer MPT

Before Ultraformer MPT
- Consult an experienced doctor to assess skin concerns.
- Inform the doctor of any prior aesthetic procedures.
- The doctor will determine the appropriate number of lines based on the patient’s condition.
- Cleanse the treatment area and apply numbing cream (leave for about 30 minutes to take effect).
Ultraformer MPT Procedure Steps
- The doctor selects the most suitable cartridge and adjusts the energy delivery pattern to precisely address each patient’s concerns.
- Cooling gel is applied during treatment to minimize heat and discomfort.
- Treatment time is approximately 20–45 minutes, depending on the treated area.
- The session concludes with a final facial cleansing.
How Much Does Ultraformer MPT Cost?
The cost of Ultraformer MPT is generally higher than that of other HIFU models because it is a newer device with a wider range of cartridges. At reputable clinics, prices typically start from 20,000 THB, depending on the number of lines used.
Interested in getting Ultraformer MPT at V Square Clinic?
Click to see the latest promotions.

How to Choose the Right Clinic for Ultraformer MPT
- Select a licensed clinic that meets medical standards, is officially registered with the Ministry of Public Health, and has a verifiable 11-digit clinic license number.
- Ensure the clinic’s doctors are experienced and have undergone proper device training. Patients can verify a doctor’s credentials through the Medical Council of Thailand’s official website.
- Confirm that the clinic uses genuine Ultraformer MPT devices, legally imported and verifiable with the official distributor.
- Look for authentic patient reviews of HIFU Ultraformer treatments from credible, neutral sources, ideally with before-and-after photos or videos.
- Choose a clinic with convenient contact options and direct access to the treating doctor for any concerns, such as a phone number or official Line@ account.
Before-and-after Ultraformer MPT treatment review at V Square Clinic








Post-Treatment Care for Ultraformer MPT
Post-treatment care after Ultraformer MPT is similar to that of HIFU:
- Continue your regular skincare routine as usual
- Avoid pressing, massaging, or washing the treated area too vigorously
- Avoid facials, treatments, or exfoliation for at least 2 weeks
- Avoid facial laser treatments for at least 2 weeks
- Apply sunscreen daily before going outdoors
- Do not wash your face with hot water, as it can dry and tighten the skin, reducing the optimal results
Precautions After Ultraformer MPT
In general, patients can return to normal daily activities right after Ultraformer MPT. There are no strict restrictions, except for avoiding other heat-based procedures for at least 1 month. This helps prevent excessive heat buildup in the skin, which could cause discomfort or unwanted side effects.
Frequently Asked Questions — Ultraformer MPT
Is Ultraformer MPT Painful?
During the procedure, you may feel a sensation like tiny pricks penetrating deep into the skin, along with warmth as the energy is delivered. This is due to heat accumulation within the skin. While there is some discomfort, it is generally tolerable, and the energy level can be adjusted for your comfort.
How Often Should You Do Ultraformer MPT?
For best results, Ultraformer MPT should be performed every 3–6 months to maintain visible and long-lasting outcomes.
Summary of Ultraformer MPT
Ultraformer MPT is best suited for those who primarily want to improve skin quality. For patients already receiving HIFU Ultraformer III treatments, switching to Ultraformer MPT is not strictly necessary, as the lifting principles and results are quite similar. Considering the price, Ultraformer III remains one of the most cost-effective lifting devices in its category.
However, for severe deep wrinkles or significant skin laxity, skin-lifting devices alone may not deliver the desired improvement. In such cases, consult your doctor for other targeted procedures such as dermal fillers or Botox.
สำหรับผู้อ่านทุกท่านที่มีข้อสงสัยเพิ่มเติม ทีมแพทย์ V Square Clinic ทุกคนยินดีให้คำปรึกษาฟรี โดยไม่มีค่าใช้จ่าย หรือสามารถปรึกษาหมอทาง inbox facebook หรือ Line นี้ได้เลยครับ หมอตอบเองครับ